How do I install a hardwired smoke/carbon monoxide detector in my home?

maltesefal

At times, the present detector's alarm sounds for no reason and must be replaced. I'd like to do it myself and avoid the expenses of a professional. I know how to shut off the electricity at the site and have all necessary tools.

Answer
Call an electrician if you mess up the detector will not work this could be very dangerous. It isn't like wiring a light if you mess up a light it just wont work you mess up this and the smoke will fail to sound during a fire.

If you don't know how to do it how do you know you have the tools you need.


********"Hi i am glad to me you" has no clue what he is taking bout there in no positive or negative wiring in a house. Electrical tape is almost never to be used for a permanent connection it will dry out with age and loose it adhesive leave the wire exposed to arcing and become a fire hazard. In the rare case tape is use for a permanent connection(burndies for very large wires in industrial setting) it is a special fat rubber tape that you will not find at home depot a roll is about $10 and an entire roll is used for just one connection making a ball of tape about the size of a baseball

Many code rules in play here smoke placement using 14-3 not 14-2 all smokes must be on an arc fault breaker

this is NOT a do it yourself type project

Are Smoke Detectors and Carbon Monoxide Detectors the same thing?

Chris(f)

there has been a lot of deaths in my city cause people got carbon monoxide poisoning so all over the news they're like "go out and buy a carbon monoxide detector!" so I went to my Wal Mart and I didn't find any. I found a bunch of smoke detectors but I already have 1 installed in my home, and then it dawned on me...maybe it's the same thing! Well is it?
if they're not the same thing, where can I buy one?
I checked Wal Mart, Target, Home Depot and some hardware shops

Answer
No Carbon monoxide detectors are not usually combined with smoke detectors also the placement of carbon monoxide detectors are crucial you. Usually you can find the kind that plugs into a outlet and you want it near a supply vent.

You can also usually go to the local fire dept and inquire about carbon monoxide detectors. Around here they usually give them out free.

We offer free carbon monoxide detectors with every furnace install. Also it is something I suggest for every furnace PM I do the cost is about $25.00 to $40.00 depending on the one the customer wants.

Check Johnstone or another HVAC supply house if you cant find one at Wal Mart, Home Depot, or Lowes.

Powered by Yahoo! Answers

Installation for CO2 detector. Floor or ceiling?

Sheltie Lo

We need to install a CO2 detector. We have the unit, but no instructions.

Should it be installed closer to the ceiling or closer to the floor?

And why?


.

Answer
Closer to the ceiling, and if only one, then place it near the sleeping area.

Here is a link -
http://www.carbonmonoxidekills.com/placement.htm

Ideally, you want one on each level of the home. And, they need to be replaced every few years, because the sensors in them deteriorate. If this is a 'used' unit, I wouldn't trust my life to it, without knowing it was working, and no more than a year old.

You should be able to look up the brand/model for complete specs.

As to 'why' the placement near the ceiling - Carbon Monoxide weighs about the same as normal air. That means it does not settle to the floor, like some gases do. The gas is produced from any kind of fuel that produces an open flame...kerosene, propane, etc. Open flames usually mean heating devices - which in turn mean the CO is being produced with hot air, as the exhaust of the flame - hot air rises. So I would suggest placing the detector about as high as you can comfortably reach, on the wall, near your bedroom(s). When you get more detectors (and I would), then place them near any possible source of CO - like a 'furnace closet', gas heater, etc.

Good Luck

Home evaluation for department of family and children services?

luckyarbor

I have a set of twin cousins in a foster home right now and I am trying to have them placed in my home so they are coming out to do a home evaluation tomorrow what are they looking for so I can pass this and get them in my home?

Answer
I actually do "homestudies" for the state of Utah. Everything needs to be safe for the child. My agency requires the child to have their own bedroom, but if they are siblings, then they can share. Own beds, that are sturdy (not air mattresses).

Windows need to have screens. There must be two exits in case of fire on each level (windows count). Fridge, stove, microwave, etc...needs to be working. There needs to be smoke detectors and carbon monoxide detectors on each level. We require fire a extinguisher. Emergency numbers posted by the phone. 3 steps or more require a banister. Bathrooms must be in working order. Heater must be able to maintain temperature of at least 68 degrees.

Furnace must have cleared space of 6 ft around it. (Or be in its own closet). Medications, firearms, and hazardous materials must be locked. Garbage must be sanitary. Those are the ones I can think of for the actual homestudy. If they don't have any of these things that can be easily fixed, we just let them know what they need to do, and we come back for a follow up visit and most likely we can approve their home.

We also do an intensive interview process to ask them about their marriage, (how they handle issues) extended family(support system), and kids. We also ask the kids in the home some questions about having foster siblings. We also talk to them about their lifestyle, activities, typical day, or week. The questions take about an hour or so, and we have foster kids with disabilities so it's a little more intense.

That is awesome that you are willing to take in your cousins. I wish I had more relatives willing to take in their family. That's so important, and kudos for doing that. I'm sure that because you are related, they will help you in any possible way to make it a successful placement.

I hope this helped you, best of luck!!!

Powered by Yahoo! Answers

Is the carbon monoxide detector supposed to be located up close to the ceiling or down close to the floor?

carbon monoxide detectors placement home image

cat14675

Answer
Proper placement of a carbon monoxide detector is important. If you are installing only one carbon monoxide detector, the Consumer Product Safety Commission (CPSC) recommends it be located near the sleeping area, where it can wake you if you are asleep. Additional detectors on every level and in every bedroom of a home provides extra protection.

Homeowners should remember not to install carbon monoxide detectors directly above or beside fuel-burning appliances, as appliances may emit a small amount of carbon monoxide upon start-up. A detector should not be placed within fifteen feet of heating or cooking appliances or in or near very humid areas such as bathrooms.

When considering where to place a carbon monoxide detector, keep in mind that although carbon monoxide is roughly the same weight as air (carbon monoxide's specific gravity is 0.9657, as stated by the EPA; the National Resource Council lists the specific gravity of air as one), it may be contained in warm air coming from combustion appliances such as home heating equipment. If this is the case, carbon monoxide will rise with the warmer air.

For this reason, I suggest mounting the detector on the ceiling. This also puts the detector out of the way of potential interference, such as pets or curious children.

If you need further assistance, please visit:
http://electricalblog.gilchrist-electric.com

Carbon Monoxide Detectors?

psychoholi

Should they be mounted high on a wall or low to the floor to properly detect Carbon Monoxide?
The detector I have is in no way going to be slept through, believe me. Should I mount it at head level with the bed? I guess really what I'm also trying to find out is if Carbon Monoxide is heavier or lighter than air.

Answer
It is recommend you place CO alarms near the sleeping areas, and on each level of the home. A good rule of thumb for the number and placement of CO alarms for your particular home is to place CO alarms near smoke and fire alarms that have been installed to meet current building code requirements in your area. Do not place CO alarms in the furnace room, kitchen or garage as these locations could lead to nuisance alarms.

Generally, one detector can be adequate for 1,200 to 1,500 square feet of living space. The most important determination for the number of CO alarms needed is whether an alarm can be heard in all sleeping areas. If you install only one CO alarm in your home, install the detector near bedrooms, not in the basement or furnace room.

For ease of viewing the visual indicators, (digital displays or alarm lights), it is recommended to place the CO alarm at eye level or above. Do not place the CO alarm in "dead air" spaces (no closer than 6" from the ceiling or floor) or turbulent air spaces such as by an open window, door or by a ceiling fan.

Powered by Yahoo! Answers

Installation for CO2 detector. Floor or ceiling?

carbon monoxide detectors placement home image

Sheltie Lo

We need to install a CO2 detector. We have the unit, but no instructions.

Should it be installed closer to the ceiling or closer to the floor?

And why?


.

Answer
Closer to the ceiling, and if only one, then place it near the sleeping area.

Here is a link -
http://www.carbonmonoxidekills.com/placement.htm

Ideally, you want one on each level of the home. And, they need to be replaced every few years, because the sensors in them deteriorate. If this is a 'used' unit, I wouldn't trust my life to it, without knowing it was working, and no more than a year old.

You should be able to look up the brand/model for complete specs.

As to 'why' the placement near the ceiling - Carbon Monoxide weighs about the same as normal air. That means it does not settle to the floor, like some gases do. The gas is produced from any kind of fuel that produces an open flame...kerosene, propane, etc. Open flames usually mean heating devices - which in turn mean the CO is being produced with hot air, as the exhaust of the flame - hot air rises. So I would suggest placing the detector about as high as you can comfortably reach, on the wall, near your bedroom(s). When you get more detectors (and I would), then place them near any possible source of CO - like a 'furnace closet', gas heater, etc.

Good Luck

Powered by Yahoo! Answers

Can you get carbon monoxide poisoning?

carbon monoxide detectors placement home image

Q. Can you get carbon monoxide poisoning if the gas is off and the leak won't be fixed til next week?

Answer
Well first off it depends on how severe the leak is. But to answer your question, yes. You can actually get Carbon Monoxide poisoning. Carbon Monoxide (abbreviated:"CO") is an odorless, colorless and tasteless gas that is very toxic if you inhale very high amounts of it. I've also heard that it is capable of damaging the nerve cells in your body and even in some occasions causing death. Just to be safe, I would recommend the placement of carbon monoxide detectors around places in your home like the kitchen or in or near the bedrooms.

Is the carbon monoxide detector supposed to be located up close to the ceiling or down close to the floor?

cat14675

Answer
Proper placement of a carbon monoxide detector is important. If you are installing only one carbon monoxide detector, the Consumer Product Safety Commission (CPSC) recommends it be located near the sleeping area, where it can wake you if you are asleep. Additional detectors on every level and in every bedroom of a home provides extra protection.

Homeowners should remember not to install carbon monoxide detectors directly above or beside fuel-burning appliances, as appliances may emit a small amount of carbon monoxide upon start-up. A detector should not be placed within fifteen feet of heating or cooking appliances or in or near very humid areas such as bathrooms.

When considering where to place a carbon monoxide detector, keep in mind that although carbon monoxide is roughly the same weight as air (carbon monoxide's specific gravity is 0.9657, as stated by the EPA; the National Resource Council lists the specific gravity of air as one), it may be contained in warm air coming from combustion appliances such as home heating equipment. If this is the case, carbon monoxide will rise with the warmer air.

For this reason, I suggest mounting the detector on the ceiling. This also puts the detector out of the way of potential interference, such as pets or curious children.

If you need further assistance, please visit:
http://electricalblog.gilchrist-electric.com

Powered by Yahoo! Answers