Jumat, 31 Januari 2014

Installation for CO2 detector. Floor or ceiling?




Sheltie Lo


We need to install a CO2 detector. We have the unit, but no instructions.

Should it be installed closer to the ceiling or closer to the floor?

And why?


.



Answer
Closer to the ceiling, and if only one, then place it near the sleeping area.

Here is a link -
http://www.carbonmonoxidekills.com/placement.htm

Ideally, you want one on each level of the home. And, they need to be replaced every few years, because the sensors in them deteriorate. If this is a 'used' unit, I wouldn't trust my life to it, without knowing it was working, and no more than a year old.

You should be able to look up the brand/model for complete specs.

As to 'why' the placement near the ceiling - Carbon Monoxide weighs about the same as normal air. That means it does not settle to the floor, like some gases do. The gas is produced from any kind of fuel that produces an open flame...kerosene, propane, etc. Open flames usually mean heating devices - which in turn mean the CO is being produced with hot air, as the exhaust of the flame - hot air rises. So I would suggest placing the detector about as high as you can comfortably reach, on the wall, near your bedroom(s). When you get more detectors (and I would), then place them near any possible source of CO - like a 'furnace closet', gas heater, etc.

Good Luck

Home evaluation for department of family and children services?




luckyarbor


I have a set of twin cousins in a foster home right now and I am trying to have them placed in my home so they are coming out to do a home evaluation tomorrow what are they looking for so I can pass this and get them in my home?


Answer
I actually do "homestudies" for the state of Utah. Everything needs to be safe for the child. My agency requires the child to have their own bedroom, but if they are siblings, then they can share. Own beds, that are sturdy (not air mattresses).

Windows need to have screens. There must be two exits in case of fire on each level (windows count). Fridge, stove, microwave, etc...needs to be working. There needs to be smoke detectors and carbon monoxide detectors on each level. We require fire a extinguisher. Emergency numbers posted by the phone. 3 steps or more require a banister. Bathrooms must be in working order. Heater must be able to maintain temperature of at least 68 degrees.

Furnace must have cleared space of 6 ft around it. (Or be in its own closet). Medications, firearms, and hazardous materials must be locked. Garbage must be sanitary. Those are the ones I can think of for the actual homestudy. If they don't have any of these things that can be easily fixed, we just let them know what they need to do, and we come back for a follow up visit and most likely we can approve their home.

We also do an intensive interview process to ask them about their marriage, (how they handle issues) extended family(support system), and kids. We also ask the kids in the home some questions about having foster siblings. We also talk to them about their lifestyle, activities, typical day, or week. The questions take about an hour or so, and we have foster kids with disabilities so it's a little more intense.

That is awesome that you are willing to take in your cousins. I wish I had more relatives willing to take in their family. That's so important, and kudos for doing that. I'm sure that because you are related, they will help you in any possible way to make it a successful placement.

I hope this helped you, best of luck!!!




Powered by Yahoo! Answers

Tidak ada komentar:

Posting Komentar