carbon monoxide detectors how do they work image
Logic316
Is there any way to make sure a carbon monoxide detector is actually working? I know you can push the button on it, but that only tests the battery, not the CO sensor itself. I have an oil burner and I've actually placed the CO detector *inside* my chimney where it got the full blast of the exhaust and temporarily turned up the fumes by making my burner run too rich. I can't be certain, but this should have produced lots of CO and the detector never went off. Any suggestions?
Answer
Carbon monoxide (CO) is a deadly, colorless, odorless, poisonous gas. It is produced by the incomplete burning of various fuels, including coal, wood, charcoal, oil, kerosene, propane, and natural gas.
Take your detector to your local fire station they know how to test them.
Carbon monoxide (CO) is a deadly, colorless, odorless, poisonous gas. It is produced by the incomplete burning of various fuels, including coal, wood, charcoal, oil, kerosene, propane, and natural gas.
Take your detector to your local fire station they know how to test them.
What is a high number on a carbon monoxide detector?
LINK
I have a Nighthawk carbon monoxide detector and what is a number to know so that i know it's dangerous and should get out? I know it goes off when theres carbon monoxide in the air but i wanna know the number just incase. And I just tested it to and it said 214 is that bad?
Answer
The nice thing about Nighthawk is that they have a digital readout of the CO level so that you can monitor it even if the CO level isn't high enough to trigger the alarm. Under normal circumstances, the display should always read 0. Now, there are things that could cause the reading to temporarily rise, like cooking with a gas stove or oven. But, after you are done cooking, the level should drop. If your detector is reading anything but 0 all the time, you need to find the source and have the problem corrected. I would normally red flag anything over 9 or 10 ppm. Although that is no where near lethal levels, it still indicates a problem. Long term exposure to low levels of CO is not good for you.
The nice thing about Nighthawk is that they have a digital readout of the CO level so that you can monitor it even if the CO level isn't high enough to trigger the alarm. Under normal circumstances, the display should always read 0. Now, there are things that could cause the reading to temporarily rise, like cooking with a gas stove or oven. But, after you are done cooking, the level should drop. If your detector is reading anything but 0 all the time, you need to find the source and have the problem corrected. I would normally red flag anything over 9 or 10 ppm. Although that is no where near lethal levels, it still indicates a problem. Long term exposure to low levels of CO is not good for you.
Powered by Yahoo! Answers
Tidak ada komentar:
Posting Komentar