Tampilkan postingan dengan label carbon monoxide detectors placement best. Tampilkan semua postingan
Tampilkan postingan dengan label carbon monoxide detectors placement best. Tampilkan semua postingan

Sabtu, 24 Mei 2014

Carbon Monoxide Detectors?




psychoholi


Should they be mounted high on a wall or low to the floor to properly detect Carbon Monoxide?
The detector I have is in no way going to be slept through, believe me. Should I mount it at head level with the bed? I guess really what I'm also trying to find out is if Carbon Monoxide is heavier or lighter than air.



Answer
It is recommend you place CO alarms near the sleeping areas, and on each level of the home. A good rule of thumb for the number and placement of CO alarms for your particular home is to place CO alarms near smoke and fire alarms that have been installed to meet current building code requirements in your area. Do not place CO alarms in the furnace room, kitchen or garage as these locations could lead to nuisance alarms.

Generally, one detector can be adequate for 1,200 to 1,500 square feet of living space. The most important determination for the number of CO alarms needed is whether an alarm can be heard in all sleeping areas. If you install only one CO alarm in your home, install the detector near bedrooms, not in the basement or furnace room.

For ease of viewing the visual indicators, (digital displays or alarm lights), it is recommended to place the CO alarm at eye level or above. Do not place the CO alarm in "dead air" spaces (no closer than 6" from the ceiling or floor) or turbulent air spaces such as by an open window, door or by a ceiling fan.

Where is the best place to put my carbon monoxide detector?




Flynn2


I live in a 1100 square foot condo. Living area, 2 small bedrooms downstairs. Upstairs is a master bedroom and master bath only. From the master bedroom upstairs, there is a small door that goes to the attic space. The hot water heater and inside HVAC unit are right next to each other. Nothing else in the house runs on gas at all. There is also an outlet next to the door on the inside.

Should I put the detector right next to the two appliances? Should I put it right outside of the small door or put one downstairs? I'm afraid if I put it in the attic and the CO came through the vents, the detector would be too late.

I would like to have this answered by a HVAC expert or emergency personnel. Thanks.



Answer
Install your carbon monoxide detector according to the specific manufacturers installation instructions that came with it. If you do not have the instructions or cannot find them for your unit, throw it out. Buy a new carbon monoxide detector with complete installation instructions and warranty information. The new co detector will come with the manufacturers placement recommendations for that specific product.

The Ultimate Solution; You can have a commercial alarm company come out and install a full set of fire, smoke, and carbon monoxide units that will be monitored 24/7.

Also, have a licensed Plumbing, HVAC, or Mechanical company inspect your gas appliances at least once a year.




Powered by Yahoo! Answers

Sabtu, 03 Mei 2014

How do I install a hardwired smoke/carbon monoxide detector in my home?




maltesefal


At times, the present detector's alarm sounds for no reason and must be replaced. I'd like to do it myself and avoid the expenses of a professional. I know how to shut off the electricity at the site and have all necessary tools.


Answer
Call an electrician if you mess up the detector will not work this could be very dangerous. It isn't like wiring a light if you mess up a light it just wont work you mess up this and the smoke will fail to sound during a fire.

If you don't know how to do it how do you know you have the tools you need.


********"Hi i am glad to me you" has no clue what he is taking bout there in no positive or negative wiring in a house. Electrical tape is almost never to be used for a permanent connection it will dry out with age and loose it adhesive leave the wire exposed to arcing and become a fire hazard. In the rare case tape is use for a permanent connection(burndies for very large wires in industrial setting) it is a special fat rubber tape that you will not find at home depot a roll is about $10 and an entire roll is used for just one connection making a ball of tape about the size of a baseball

Many code rules in play here smoke placement using 14-3 not 14-2 all smokes must be on an arc fault breaker

this is NOT a do it yourself type project

Smoke Detectors Question?




kasmira25


I just moved into a whole house and have noticed that there is one non working old as dirt smoke detector in the kitchen and non anywhere else in the house.

How many smoke detectors do i need?
I live in upstate NY
The house has a full unfinished basement, first floor,second floor with 4 bedrooms and bathroom, unfinished attic.
Gas heat and stove- so do i need a carbon monoxide detector?
I have two small children
The house is not new, its an older victorian

Any info would be helpful as to the amount and placement!! Thank you!



Answer
Not sure what the laws are regarding them, but I will give you best practices.

There should be at least one smoke detector and one carbon monoxide detector on each level of the home.

Each bedroom should have it's own smoke detector, preferably near the door to catch any smoke entering from the hallway.

Don't put a smoke detector in the kitchen due to nuisance alarms, but it's a good idea to have one nearby.

So I would recommend 8 smoke alarms and 3 CO detectors. If you want you can substitute 3 CO/smoke combo detectors.

Put one in each bedroom, one in the main hall on the second floor, two on the main floor, and one or two in the basement depending how big it is.




Powered by Yahoo! Answers

Selasa, 07 Januari 2014

Home evaluation for department of family and children services?

carbon monoxide detectors placement best on Carbon Monoxide Detector
carbon monoxide detectors placement best image



luckyarbor


I have a set of twin cousins in a foster home right now and I am trying to have them placed in my home so they are coming out to do a home evaluation tomorrow what are they looking for so I can pass this and get them in my home?


Answer
I actually do "homestudies" for the state of Utah. Everything needs to be safe for the child. My agency requires the child to have their own bedroom, but if they are siblings, then they can share. Own beds, that are sturdy (not air mattresses).

Windows need to have screens. There must be two exits in case of fire on each level (windows count). Fridge, stove, microwave, etc...needs to be working. There needs to be smoke detectors and carbon monoxide detectors on each level. We require fire a extinguisher. Emergency numbers posted by the phone. 3 steps or more require a banister. Bathrooms must be in working order. Heater must be able to maintain temperature of at least 68 degrees.

Furnace must have cleared space of 6 ft around it. (Or be in its own closet). Medications, firearms, and hazardous materials must be locked. Garbage must be sanitary. Those are the ones I can think of for the actual homestudy. If they don't have any of these things that can be easily fixed, we just let them know what they need to do, and we come back for a follow up visit and most likely we can approve their home.

We also do an intensive interview process to ask them about their marriage, (how they handle issues) extended family(support system), and kids. We also ask the kids in the home some questions about having foster siblings. We also talk to them about their lifestyle, activities, typical day, or week. The questions take about an hour or so, and we have foster kids with disabilities so it's a little more intense.

That is awesome that you are willing to take in your cousins. I wish I had more relatives willing to take in their family. That's so important, and kudos for doing that. I'm sure that because you are related, they will help you in any possible way to make it a successful placement.

I hope this helped you, best of luck!!!

Can you get carbon monoxide poisoning?

Q. Can you get carbon monoxide poisoning if the gas is off and the leak won't be fixed til next week?


Answer
Well first off it depends on how severe the leak is. But to answer your question, yes. You can actually get Carbon Monoxide poisoning. Carbon Monoxide (abbreviated:"CO") is an odorless, colorless and tasteless gas that is very toxic if you inhale very high amounts of it. I've also heard that it is capable of damaging the nerve cells in your body and even in some occasions causing death. Just to be safe, I would recommend the placement of carbon monoxide detectors around places in your home like the kitchen or in or near the bedrooms.




Powered by Yahoo! Answers

Jumat, 27 Desember 2013

Can you get carbon monoxide poisoning?

carbon monoxide detectors placement best on for a carbon monoxide detector learn the best detector placement to ...
carbon monoxide detectors placement best image
Q. Can you get carbon monoxide poisoning if the gas is off and the leak won't be fixed til next week?


Answer
Well first off it depends on how severe the leak is. But to answer your question, yes. You can actually get Carbon Monoxide poisoning. Carbon Monoxide (abbreviated:"CO") is an odorless, colorless and tasteless gas that is very toxic if you inhale very high amounts of it. I've also heard that it is capable of damaging the nerve cells in your body and even in some occasions causing death. Just to be safe, I would recommend the placement of carbon monoxide detectors around places in your home like the kitchen or in or near the bedrooms.

Is the carbon monoxide detector supposed to be located up close to the ceiling or down close to the floor?




cat14675





Answer
Proper placement of a carbon monoxide detector is important. If you are installing only one carbon monoxide detector, the Consumer Product Safety Commission (CPSC) recommends it be located near the sleeping area, where it can wake you if you are asleep. Additional detectors on every level and in every bedroom of a home provides extra protection.

Homeowners should remember not to install carbon monoxide detectors directly above or beside fuel-burning appliances, as appliances may emit a small amount of carbon monoxide upon start-up. A detector should not be placed within fifteen feet of heating or cooking appliances or in or near very humid areas such as bathrooms.

When considering where to place a carbon monoxide detector, keep in mind that although carbon monoxide is roughly the same weight as air (carbon monoxide's specific gravity is 0.9657, as stated by the EPA; the National Resource Council lists the specific gravity of air as one), it may be contained in warm air coming from combustion appliances such as home heating equipment. If this is the case, carbon monoxide will rise with the warmer air.

For this reason, I suggest mounting the detector on the ceiling. This also puts the detector out of the way of potential interference, such as pets or curious children.

If you need further assistance, please visit:
http://electricalblog.gilchrist-electric.com




Powered by Yahoo! Answers

Senin, 23 September 2013

Will a carbon monoxide detector detect it in the basement?

carbon monoxide detectors placement best on Calfire Stove Flue Pipe Thermometer
carbon monoxide detectors placement best image



O Sh


We have to for each in each floor of the house, but not in the basement. Will it pick it up?


Answer
Yes, carbon monoxide has a similar density to air, therefore it mixes well and placement is not much of a concern. I would add one to the basement especially if it is used as a sleeping quarter.

Home evaluation for department of family and children services?




luckyarbor


I have a set of twin cousins in a foster home right now and I am trying to have them placed in my home so they are coming out to do a home evaluation tomorrow what are they looking for so I can pass this and get them in my home?


Answer
I actually do "homestudies" for the state of Utah. Everything needs to be safe for the child. My agency requires the child to have their own bedroom, but if they are siblings, then they can share. Own beds, that are sturdy (not air mattresses).

Windows need to have screens. There must be two exits in case of fire on each level (windows count). Fridge, stove, microwave, etc...needs to be working. There needs to be smoke detectors and carbon monoxide detectors on each level. We require fire a extinguisher. Emergency numbers posted by the phone. 3 steps or more require a banister. Bathrooms must be in working order. Heater must be able to maintain temperature of at least 68 degrees.

Furnace must have cleared space of 6 ft around it. (Or be in its own closet). Medications, firearms, and hazardous materials must be locked. Garbage must be sanitary. Those are the ones I can think of for the actual homestudy. If they don't have any of these things that can be easily fixed, we just let them know what they need to do, and we come back for a follow up visit and most likely we can approve their home.

We also do an intensive interview process to ask them about their marriage, (how they handle issues) extended family(support system), and kids. We also ask the kids in the home some questions about having foster siblings. We also talk to them about their lifestyle, activities, typical day, or week. The questions take about an hour or so, and we have foster kids with disabilities so it's a little more intense.

That is awesome that you are willing to take in your cousins. I wish I had more relatives willing to take in their family. That's so important, and kudos for doing that. I'm sure that because you are related, they will help you in any possible way to make it a successful placement.

I hope this helped you, best of luck!!!




Powered by Yahoo! Answers

Senin, 02 September 2013

Can you get carbon monoxide poisoning?

carbon monoxide detectors placement best on Proper Placement, Testing, Periodic Maintenance, Life
carbon monoxide detectors placement best image
Q. Can you get carbon monoxide poisoning if the gas is off and the leak won't be fixed til next week?


Answer
Well first off it depends on how severe the leak is. But to answer your question, yes. You can actually get Carbon Monoxide poisoning. Carbon Monoxide (abbreviated:"CO") is an odorless, colorless and tasteless gas that is very toxic if you inhale very high amounts of it. I've also heard that it is capable of damaging the nerve cells in your body and even in some occasions causing death. Just to be safe, I would recommend the placement of carbon monoxide detectors around places in your home like the kitchen or in or near the bedrooms.

Is the carbon monoxide detector supposed to be located up close to the ceiling or down close to the floor?




cat14675





Answer
Proper placement of a carbon monoxide detector is important. If you are installing only one carbon monoxide detector, the Consumer Product Safety Commission (CPSC) recommends it be located near the sleeping area, where it can wake you if you are asleep. Additional detectors on every level and in every bedroom of a home provides extra protection.

Homeowners should remember not to install carbon monoxide detectors directly above or beside fuel-burning appliances, as appliances may emit a small amount of carbon monoxide upon start-up. A detector should not be placed within fifteen feet of heating or cooking appliances or in or near very humid areas such as bathrooms.

When considering where to place a carbon monoxide detector, keep in mind that although carbon monoxide is roughly the same weight as air (carbon monoxide's specific gravity is 0.9657, as stated by the EPA; the National Resource Council lists the specific gravity of air as one), it may be contained in warm air coming from combustion appliances such as home heating equipment. If this is the case, carbon monoxide will rise with the warmer air.

For this reason, I suggest mounting the detector on the ceiling. This also puts the detector out of the way of potential interference, such as pets or curious children.

If you need further assistance, please visit:
http://electricalblog.gilchrist-electric.com




Powered by Yahoo! Answers