Tampilkan postingan dengan label carbon monoxide detectors how many. Tampilkan semua postingan
Tampilkan postingan dengan label carbon monoxide detectors how many. Tampilkan semua postingan

Selasa, 18 Februari 2014

Where should I put the Carbon Monoxide detector?




lovejustin


I recently purchased only one carbon monoxide detector, and I live in a three story house. The furnace is in the basement, if that effects anything :) Please help me decide where to put it in order to be safe!


Answer
Where Should I Place a Carbon Monoxide Detector?

Because carbon monoxide is slightly lighter than air and also because it may be found with warm, rising air, detectors should be placed on a wall about 5 feet above the floor. The detector may be placed on the ceiling. Do not place the detector right next to or over a fireplace or flame-producing appliance. Keep the detector out of the way of pets and children. Each floor needs a separate detector. If you are getting a single carbon monoxide detector, place it near the sleeping area and make certain the alarm is loud enough to wake you up.
http://chemistry.about.com/od/howthingswork/a/codetectors.htm

Carbon Monoxide!?!?!?




Elizabeth


I need a list of all the places carbon monoxide can leak from in the home, and why it leaks. I overreact I guess but I just want to be safe so I'm worried please help!!!
And yes I have carbon monoxide detectors.



Answer
Carbon monoxide forms when an carbon based fuel (all gas, petrol, fuel, ethanol) doesn't burn with enough oxygen to form carbon dioxide. This happens everytime you use a gas device, because the oxygen is just not concentrated enough in the local area to allow for the fuel to burn completely and leave no carbon monoxide. This is natural and not to worry about.

I imagine you're most likely to be at risk from faulty combustion devices like furnaces, gas fireplaces and heaters and spirit burners. Anything that burns gas and isn't in a well ventilated area (that's why outdoor stoves are fine, the wind just blows the carbon monoxide away) should be checked.
I stress that these products would have had to meet a certain level of quality before being sold to you - and that regular maintanence would avoid any leaks/ build up. If in doubt, consult your local firebrigade - i'm serious, they'd be glad to help, it's their job.




Powered by Yahoo! Answers

Sabtu, 03 Agustus 2013

what will carbon monoxide detector sound like if there is CO in home?

carbon monoxide detectors how many on carbon_monoxide_alarm01
carbon monoxide detectors how many image



Chloegirl


I just plugged in a first alert carbon monoxide detector down in basement. The horn will sound once or twice every 20 minutes or so and the red light will flash every so often also. Is this a malfunction or is there CO in my home?


Answer
A very load chirping noise.

Is it normal for a carbon monoxide detector to read 0 ppm?




dfjkdfj


Sorry for posting a second time, but the first question did not get any good answers. Is it normal for a carbon monoxide detector to read 0 PPM? I have one that shows the highest level over the past 24 hours, and whenever I check it always reads 0 PPM. Is this normal? I would think there might be one or two PPM in the house, considering the lowest level it would bother sensitive people is 30 PPM.


Answer
Actually in the 0 to 29 ppm level CO detectors are not allowed to display the actual CO level, and are required to display zero in that range according to CO alarm standards developed by Underwriters Laboratories (UL2034) in collaboration with the US Consumer Product Safety Commission. (The display and alarm specifications of UL2034 are matched in a Canadian standard, CSA 6.19-01)




Powered by Yahoo! Answers