Sabtu, 28 Desember 2013

How to test a carbon monoxide detector?

carbon monoxide detectors where to place on Where to Place a Carbon Monoxide Detector
carbon monoxide detectors where to place image



Logic316


Is there any way to make sure a carbon monoxide detector is actually working? I know you can push the button on it, but that only tests the battery, not the CO sensor itself. I have an oil burner and I've actually placed the CO detector *inside* my chimney where it got the full blast of the exhaust and temporarily turned up the fumes by making my burner run too rich. I can't be certain, but this should have produced lots of CO and the detector never went off. Any suggestions?


Answer
Carbon monoxide (CO) is a deadly, colorless, odorless, poisonous gas. It is produced by the incomplete burning of various fuels, including coal, wood, charcoal, oil, kerosene, propane, and natural gas.

Take your detector to your local fire station they know how to test them.

where is the best place to install a carbon monoxide detector?




tony b


I've seen conflicting information regarding the best place to put a carbon monoxide detector. Which is correct, near the floor or near the ceiling.?


Answer
well usually you want them fifteen feet from any fuel burning heating or cooking appliances because during start up a small amount is emitted. Bathrooms usually hold to much humidity so usually not there. Installation locations vary by manufacturer. since it is roughly the same weight as air If you have central air keep in mind during heating it may be contained in rising warm air. It is a good idea to have them within ten feet of every bedroom in your home and on each floor including your basement. Follow whatever the brand you buys instructions are because they are all tested specific in ways.




Powered by Yahoo! Answers

Tidak ada komentar:

Posting Komentar